Physics 1

A light string that is attached to a large block of mass 4m passes over a pulley with negligible rotational inertia and is wrapped around a vertical pole of radius r, as shown below. The system is released from rest, and as the block descends the string unwinds and the vertical pole with its attached apparatus rotates. The apparatus consists of a horizontal rod of length 2L, with a small block of mass m attached at each end. The rotational inertia of the pole and the rod are negligible.

D. When the large block has descended a distance D, how does the instantaneous total kinetic energy of the three blocks compare to that in part (C), Greater, Equal, or Less?

A solid disk of unknown mass and known radius R is used as a pulley in a lab experiment as shown below. A small block of mass m is attached to a string, the other end of which is attached to the pulley and wrapped around it several times. The block of mass m is released from rest and takes a time t to fall the distance D to the floor.

D. The value of acceleration found in (B)iii, along with numerical values for the given quantities and your answer to (C), can be used to determine the rotational inertia of the pulley. The pulley is removed from its support and its rotational inertia is found to be greater than this value. Give one explanation for this discrepancy.

A uniform rod of mass M and length L is attached to a pivot of neglible friction as shown below. The pivot is located at a distance $\frac{L}{3}$ from the left end of the rod. Express all answers in terms of the given quantities and fundamental constants.

A system consists of a ball of mass $M_2$ and a uniform rod of mass $M_1$ and length $d$. The rod is attached to a horizontal frictionless table by a pivot at point $P$ and initially rotates at an angular speed $\omega$, pictured below on the left. The rotational inertia of the rod about point $P$ is $\frac{1}{3}M_1d^2$ . The rod strikes the ball, which is initially at rest. As a result of this collision, the rod is stopped and the ball moves in the direction shown on the right. Express all answers in terms of $M_1$ , $M_2$ , $\omega$ , $d$ , and fundamental constants.

D. A new ball with the same mass $M_1$ as the rod is now placed a distance $x$ from the pivot, as shown above. Again assuming the collision is elastic, for what value $x$ will the rod stop moving after hitting the ball?

In March 1999 the Mars Global Surveyor (GS) entered its final orbit about Mars, sending data back to Earth. Assume a circular orbit with a period of 1.18 x 10 $^2$ minutes = 7.08 x 10 $^3$ m/s. The mass of the GS is 930 kg and the radius of Mars is 3.43 x 10$^6$ m .

A. Calculate the radius of the GS orbit.

B. Calculate the mass of Mars.

C. Calculate the total mechanical energy of the GS in this orbit.

D. If the GS was to be placed in a lower circular orbit (closer to the surface of Mars), would the new orbital period of the GS be greater than or less than the given period?

E. In fact, the orbit of the GS entered was slightly eliptical with its closest approach to Mars at 3.71 x 10 $^5$ m above the surface and its furthest distance at 4.36 x 10 $^5$ m above the surface. If the speed of the GS at closest approach is 3.40 x 10 $^3$ m/s, calculate the speed at the furthest point of the orbit.

Two blocks (m = 1.8 kg and M = 10 kg) and a spring ( k = 200 N/m ) are arranged on a horizontal frictionless surface. The coefficient of static friction between the two blocks is 0.40. What amplitude of simple harmonic motion of the spring-block system puts the smaller block on the verge of slipping over the larger block?